Condition: Brand new, official 1–2 year manufacturer warranty.
Oraimo SmartIron 1740W Price in Kenya: OEI-801A Non-Stick Ceramic Steam Iron
The Oraimo Smart Iron 1740W (Model OEI-801A) is a multi-functional household steam and dry iron engineered to press school uniforms, office shirts, heavy denim, and delicate fabrics quickly without scorching or water staining. Powered by a 1740-watt fast-heating thermal element matched with a smooth non-stick ceramic soleplate, it reaches working temperature in under 30 seconds on standard 220–240V AC Kenyan mains electricity. We stock this Oraimo home appliance for Kenyan families, university students, and professionals seeking a versatile 5-in-1 steam iron built with anti-drip and self-cleaning protection.
Condition & Warranty: Brand new, official 1–2 year manufacturer warranty.
Combining dry ironing, continuous variable steam, high-pressure steam burst, fine water spray mist, and vertical garment steaming in one ergonomic chassis with a 360-degree swivel power cord, the Oraimo OEI-801A handles everything from flat ironing boards to hanging suit jackets and living room curtains. Below you will find the complete technical specifications, fabric temperature dial settings, step-by-step self-cleaning descaling instructions for Kenyan tap water, and answers to common buyer questions.
Key Highlights
- 1740W rapid-heating element (220–240V AC, 50/60Hz) that reaches operating temperature in approximately 25 to 30 seconds
- Smooth non-stick ceramic-coated soleplate with precision micro-steam vents and a tapered button-groove tip
- 5-in-1 ironing modes: Dry Ironing, Continuous Steam, Explosive Steam Burst, Water Spray Mist, and Vertical Steaming
- Built-in Anti-Drip temperature valve that prevents water droplets from leaking onto delicate silk or nylon at low heat
- Integrated Anti-Calc resin filter and one-touch Self-Clean flushing function to prevent mineral scale blockages
- Translucent water reservoir with wide front filling port and included plastic water measuring cup
- Variable rotary thermostat dial with clear fabric markings for Synthetics, Silk, Wool, Cotton, and Linen
- 1.9-metre 360-degree flexible swivel cord with a moulded 3-pin Type G fused plug for Kenyan wall sockets
Detailed Description of the Oraimo SmartIron 1740W (OEI-801A)
1740W Rapid Heating Element and Ceramic Non-Stick Soleplate
Traditional 1000W dry irons take several minutes to warm up and often struggle to maintain plate heat when gliding across damp cotton bedsheets or thick school blazers. The Oraimo SmartIron OEI-801A steps output up to 1740W, driving rapid thermal recovery across the entire soleplate surface. Within 30 seconds of plugging the 3-pin plug into a wall socket and turning the thermostat dial, the orange heating indicator lamp signals when the plate has stabilized at your chosen fabric temperature.
The soleplate is finished with a low-friction non-stick ceramic glaze rather than bare polished aluminum. Ceramic distributes heat evenly from center to edge, preventing localized hot spots that can shine dark trousers or melt synthetic uniform blends. Dozens of laser-aligned steam micro-vents arranged in a U-loop around the perimeter cushion the iron on a thin layer of vapour, while the pointed front nose and recessed button groove slip cleanly between shirt buttons, pleats, and collar seams.
Five-Mode Versatility: Dry, Steam, Burst, Spray, and Vertical Steaming
Rather than restricting you to a single ironing style, the Oraimo SmartIron 1740W adapts to every garment in a household laundry basket through five distinct operating modes:
- Dry Ironing Mode: Slide the top steam selector switch to the zero (no-steam) position to press crisp creases into dry trousers, pleated skirts, or heat-sensitive nylon without moisture—even when water remains inside the reservoir.
- Continuous Variable Steam Mode: Fill the translucent tank using the included cup and slide the steam lever to low or high once the thermostat reaches the Cotton or Linen zone; steady steam softens fabric fibres as you glide.
- Explosive Steam Burst (Shot of Steam): Press the top steam-burst trigger button to fire a concentrated jet of steam deep into stubborn wrinkles on heavy denim jeans, table linens, and folded cotton shirts.
- Front Water Spray Mist: Press the adjacent spray nozzle button to project a fine mist of water ahead of the iron nose, dampening bone-dry cuffs and collars for flatter pressing.
- Vertical Steaming Mode: Set the thermostat to maximum, hold the iron upright 2 to 5 centimetres away from hanging garments, and press the steam-burst trigger at 5-second intervals to refresh hanging suit jackets, dresses, and window curtains right on the hanger.
Anti-Drip Protection, Anti-Calc Filter, and Self-Clean Descaling Procedure
A common frustration with budget steam irons is brown calcified water spitting out of the soleplate vents onto white shirts—especially in Kenyan estates supplied by hard borehole water. The Oraimo SmartIron OEI-801A addresses this with three internal safeguards. First, an automatic Anti-Drip bi-metallic valve seals off the steam chamber whenever the soleplate temperature drops below the steam threshold, stopping unvaporized water from dripping through the holes when ironing silk or polyester at low heat. Second, an internal Anti-Calc resin cartridge reduces mineral hardness inside the water tank.
Third, the dedicated Self-Clean button lets you flush accumulated mineral scale and lint out of the steam chamber once every two to four weeks. To run the Self-Clean cycle safely:
- Fill the water tank halfway to the MAX line with clean water, set the steam selector switch to 0 (Off), and turn the temperature dial to MAX.
- Plug in the iron and wait until the heating indicator light turns off, then unplug the iron from the wall socket immediately.
- Hold the iron horizontally over a kitchen or laundry sink with the ceramic soleplate facing down.
- Press and hold the Self-Clean button while gently rocking the iron back and forth; boiling water and steam will flush chalky mineral deposits out through the soleplate vents into the sink.
- Once the tank is empty, plug the iron back in and glide it over an old cotton towel for 60 seconds to dry the internal steam channels before storage.
Fabric Temperature Dial Guide and 360-Degree Swivel Cord Ergonomics
Sorting laundry from lowest heat to highest heat prevents accidental scorching when switching from heavy cotton back to synthetics. Always start ironing with Level 1 (Nylon, Acrylic, and delicate Synthetics with Dry mode only), move to Level 2 (Silk and Wool on low steam), and finish with Level 3 / MAX (Cotton and Linen with full continuous steam and burst). The rear cord entry features a 360-degree ball-joint swivel guard that keeps the 1.9-metre braided cord from kinking or dragging across freshly ironed clothes whether you iron left-handed or right-handed.
Oraimo SmartIron 1740W (OEI-801A) Specifications
Watch: Oraimo SmartIron 1740W Video Overview
Buyer Guidance: Who It Suits & What It Is Not
Who It Suits
The Oraimo SmartIron 1740W suits households, parents pressing daily school uniforms, office professionals maintaining crisp cotton shirts and suits, and apartment residents who want one reliable appliance that handles both dry flat ironing and vertical curtain or blazer steaming.
What It Is Not
This is a corded 220–240V AC 1740W household iron, not a battery-powered cordless iron or a commercial tailor's boiler press. Because it draws 1740W during heating cycles, it must be plugged into mains electricity rather than small 300W solar lighting inverters.
Pros & Cons
Official Specs and Reviews
Questions About the Oraimo SmartIron 1740W
What is the exact model number of the Oraimo SmartIron 1740W?
The official manufacturer model number is Oraimo OEI-801A, rated at 1740W on 220–240V AC 50/60Hz power.
Can I use the Oraimo SmartIron as a dry iron without water?
Yes. Leave the water tank empty or slide the top steam control lever to the 0 (Dry) position to use it as a classic dry iron on any fabric setting.
Does the soleplate stick to nylon or school uniform fabrics?
No, provided you match the thermostat dial to the correct fabric setting (Level 1 for Nylon/Synthetics). The ceramic non-stick coating prevents clinging and static drag.
Can I use regular Nairobi tap water inside the steam tank?
Yes, the built-in Anti-Calc system handles normal tap water. If your home uses mineral-heavy borehole water, mixing 50% tap water with 50% distilled/filtered water and running the Self-Clean cycle monthly will prolong steam vent performance.
Why does water leak out of some steam irons, and how does this model prevent it?
Water leaks happen when steam is turned on before the soleplate is hot enough to vaporize water. The Oraimo OEI-801A includes an automatic Anti-Drip valve that blocks water flow at low temperatures.
How do I iron hanging suits or curtains with the vertical steam feature?
Fill the tank, turn the dial to MAX, hold the iron vertically 2 to 5 cm away from the hanging fabric, and press the Steam Burst button in 5-second intervals.
What comes inside the Oraimo SmartIron retail box?
The box includes the Oraimo SmartIron 1740W (OEI-801A), a plastic water measuring cup for filling the reservoir, and the user instruction manual.
How do I clean the outside of the ceramic soleplate if starch builds up?
Allow the iron to cool completely, then wipe the ceramic plate with a soft damp cloth and mild soapy water. Never use steel wool, knives, or abrasive scouring pads on the ceramic coating.
Does the power cord come with a Kenyan 3-pin plug?
Yes. The 1.9-metre swivel cord terminates in a standard British Type G 3-pin rectangular plug that fits Kenyan wall sockets and power extensions directly.
How does the thermostat indicator light work during ironing?
The indicator lamp lights up while the 1740W element is actively heating and switches off once the selected soleplate temperature is reached, cycling on and off automatically to maintain steady heat.
Ready to Buy?
The practical Oraimo SmartIron 1740W price in Kenya gives every household a fast-heating 5-in-1 ceramic steam and dry iron built for daily reliability. Visit Zentech Electronics Kenya at The Bazaar Plaza, Moi Avenue, 10th Floor, Wing A, Suite 1038 in the Nairobi CBD. We offer same-day delivery within Nairobi and courier shipping across Kenya, accepting M-Pesa, card, bank transfer, and cash on delivery within Nairobi only.